Home Archive Volume 4 (June 2013)
VOLUME 4 (JUNE 2013)

Journal of Mechanical Engineering and Sciences (JMES)

ISSN (Print): 2289-4659; e-ISSN: 2231-8380; Volume 4, June 2013

© Universiti Malaysia Pahang, Pekan, Pahang, Malaysia



Title and Authors




Back Chip Temperature in Environmentally Conscious Turning with Conventional and Internally Cooled Cutting Tools

Saiful Anwar Bin Che Ghani, Kai Cheng and Timothy Minton

DOI: http://dx.doi.org/10.15282/jmes.4.2013.1.0034



A Semi-Empirical Model to Predict Diesel Engine Combustion Parameters

B. Ghobadian, G. Najafi and M. Nayebi

DOI: http://dx.doi.org/10.15282/jmes.4.2013.2.0035



Effects of Isentropic Efficiency and Enhancing Strategies on Gas Turbine Performance

Thamir K. Ibrahim and M.M. Rahman

DOI: http://dx.doi.org/10.15282/jmes.4.2013.3.0036



Nanofluid Properties for Forced Convection Heat Transfer: An Overview

W.H.Azmi, K.V. Sharma, Rizalman Mamat and Shahrani Anuar

DOI: http://dx.doi.org/10.15282/jmes.4.2013.4.0037



Impact of Quench Severity and Hardness on AISI 4137 using Eco-Friendly Quenchants as Industrial Heat Treatment

A.S. Adekunle, K.A. Adebiyi and M.O. Durowoju

DOI: http://dx.doi.org/10.15282/jmes.4.2013.5.0038



Laminar Forced Convection Heat Transfer over Staggered Circular Tube Banks: A CFD Approach

Tahseen A. Tahseen, M. Ishak and M.M. Rahman

DOI: http://dx.doi.org/10.15282/jmes.4.2013.6.0039



Heat and Mass Transfer Effects on Flow Past Parabolic Started Isothermal Vertical Plate in the Presence of First Order Chemical Reaction

R.Muthucumaraswamy and  S.Velmurugan

DOI: http://dx.doi.org/10.15282/jmes.4.2013.7.0040



Fault Detection and Localization in Motorcycles Based on the Chain Code of Pseudospectra and Acoustic Signals

B.S. Anami and V.B. Pagi

DOI: http://dx.doi.org/10.15282/jmes.4.2013.8.0041



Heat Transfer Enhancement with Nanofluids – A Review

Adnan M. Hussein, K.V. Sharma, R.A. Bakar and K. Kadirgama

DOI: http://dx.doi.org/10.15282/jmes.4.2013.9.0042



Thermal Convection of Rivlin-Ericksen Fluid in the Presence of Vertical Rotation

Ajaib S. Banyal and Daleep K. Sharma

DOI: http://dx.doi.org/10.15282/jmes.4.2013.10.0043



Determination of Optimal Ball Burnishing Parameters for Surface Roughness of Aluminum Alloy

D. B. Patel and  T. M. Patel

DOI: http://dx.doi.org/10.15282/jmes.4.2013.11.0044



Application of Taguchi and ANOVA in Optimization of Process Parameters of Lapping Operation for Cast Iron

Pravin R. Parate and  Ravindra B. Yarasu

DOI: http://dx.doi.org/10.15282/jmes.4.2013.12.0045



Remanufacturing Process and Its Challenges

M. Andrew-Munot and R.N. Ibrahim

DOI: http://dx.doi.org/10.15282/jmes.4.2013.13.0046



Prediction of Blood Pattern in S-Shaped Model of Artery under Normal Blood Pressure

Mohd Azrul Hisham Mohd Adib, Norashikin Nor Tuah Nur Hazreen Mohd Hasni, Kahar Osman

DOI: http://dx.doi.org/10.15282/jmes.4.2013.14.0047



Effect of Particle Size and Packing Ratio of PID on Vibration Amplitude of Beam

P.S. Kachare and Bimleshkumar

DOI: http://dx.doi.org/10.15282/jmes.4.2013.15.0048



Study of Mechanical Properties of Banana-Coir Hybrid Composite using Experimental and Fem Techniques

T. Hariprasad,  G. Dharmalingam and P. Praveen Raj

DOI: http://dx.doi.org/10.15282/jmes.4.2013.16.0049



Effect of Slip Velocity on Magnetic Fluid Lubrication of Rough Porous Rayleigh Step Bearing

Snehal Shukla and   Gunamani Deheri

DOI: http://dx.doi.org/10.15282/jmes.4.2013.17.0050



Effect of Reinforcement Alignment on the Properties of Polymer Matrix Composite

M. R. Aeyzarq Muhammad Hadzreel and I. Siti Rabiatull Aisha

DOI: http://dx.doi.org/10.15282/jmes.4.2013.18.0051